Master the Art of Shooting a Compound Bow with Fingers| compound bow

Have you ever tried shooting a compound bow with your fingers? It’s not as hard as it looks! Once you get the hang of it, it can be quite enjoyable. Here are a few tips to help you get started.

shooting a compound bow with your fingers

Finger Compound Setup Help

Before going to setup compound bow you can check my another article about how to choose a compound bow.

How to set up a compound bow for finger shooting?

You can follow the steps given below-

1. Use a bow square to measure the distance from the bottom of the nock to the plunger. 

2. Place an arrow shaft against the plunger so that the center of the shaft is touching the plunger. 

3. Measure from the bottom of the nock to the tip of the arrow and record this measurement. 

4. Compare this measurement to the distance from the bottom of the nock to the top of the limb pocket. 

5. If this measurement is 1/8th inch or more positive, your tiller is good. You will need to adjust your tiller if it is less than 1/8th inch positive.

3 important tips for shooting a compound bow with fingers

Choose the right size finger sling

When choosing a finger sling for your compound bow, it’s important to ensure it’s the right size. The sling should be snug but not too tight. 

Adjust the placement of your fingers

For most people, the best placement is to put the index finger above the arrow and the middle and ring fingers below. This gives you more control over the release while still offering stability.

Use a release aid

A release aid is a device that helps you release the string of your compound bow smoothly and evenly. Many different types of release aids are available on the market, so take some time to explore your options and find one that suits your needs and shooting style. Attach the release aid to your bowstring using a D-loop or released-assisted draw (RAD) system.

How to Find the Right Finger Protection

When it comes to finding the right finger protection, there are a few things you need to take into account. What material do you need the protection to be made out of? What size do you need? How much dexterity do you need? Do you need it to be ambidextrous? These important questions will help you narrow your search and find the right finger protection.

Material

One of the first things you need to consider when looking for finger protection is what material you need it to be made of. There are various materials that finger protection can be made of, including leather, latex, neoprene, nitrile, and vinyl. 

Size

Another important consideration is size. Finger protection comes in a variety of sizes, from XS to XL. Choosing a size that fits snugly on your fingers without being too tight or loose is important. If the finger protection is too loose, it will likely fall off during use. If it’s too tight, it will be uncomfortable and may impede your dexterity.

Dexterity

Another thing to consider is how much dexterity you need. If you need a high degree of dexterity, you’ll want to look for finger protection that is thin and allows for a good range of motion. If you don’t need as much dexterity, you can opt for thicker finger protection that offers more protection but may somewhat limit your range of motion.

Ambidextrous Design

Finally, another thing to consider is whether or not you need an ambidextrous design. If you plan on using your finger protection with both hands, you’ll want to ensure that the design is ambidextrous. This means that it can be worn on either hand without issue. Many designs are not ambidextrous, so this is something to keep in mind if you think you may need to use your finger protection with both hands.

Shooting a compound bow without a release

What Is a Release on a Compound Bow?

The array of gear and equipment can be overwhelming for anyone new to archery or bowhunting. One question that frequently comes up is, “What is a release on a compound bow?” In short, a release is a device that helps you hold and release the bowstring consistently and smoothly. 

Choose the right release

There are three main types of releases: mechanical, hand-held, and wrist-strap. Each has advantages and disadvantages, so choosing the right one for your shooting style is important. Here’s a quick overview of each type of release:

Mechanical Releases

Mechanical releases are the most popular type of release for competitive shooters. They attach to your compound bow via a strap that goes around your wrist or arm, and they have a trigger that you pull to release the string. 

Mechanical releases offer greater accuracy than other releases because they provide a consistent, controlled release every time. However, they can be more expensive than other releases and take some time to get used to.

Mechanical Releases

Hand-Held Releases

Hand-held releases are exactly what they sound like—releases that you hold in your hand while you shoot. They’re simple to use and relatively affordable, but they can be less accurate than mechanical releases because it’s harder to achieve a consistent release with them. Hand-held releases are a good option for beginners or shooters who don’t need the highest level of accuracy.

Hand-Held Releases

Wrist-Strap Releases

Wrist-strap releases are similar to mechanical releases but don’t have a trigger. Instead, you squeeze the release with your fingertips to release the string. Wrist-strap releases are less expensive than mechanical releases, but they can be less accurate because it’s easy to fire them when you squeeze too hard unintentionally. They’re a good option for shooters on a budget or those who want an alternative to mechanical releases. 

Wrist-Strap Releases

How to shoot without a release?

There are two ways to shoot a compound bow with fingers or without a release. One is to use the index finger and thumb in a pinch grip, and the other is to use the first three fingers (index, middle, and ring fingers). In both cases, you want to keep your fingers close together and point down toward the ground.

When you’re ready to shoot, extend your arm out in front of you and hold the bowstring against your cheek. Then, using your back muscles, bend your elbow until the bowstring is at eye level. Keep your shoulder relaxed, and don’t let the bowstring move forward or backward. When ready to shoot, release the bowstring by pushing it away from your face with your fingers.

best finger-shooting bows

When it comes to finding the best bows for finger-shooting, there are a few things you’ll want to keep in mind. First, consider the type of shooting you’ll be doing most often. You’ll want a bow designed for accuracy if you plan on shooting mostly targets. On the other hand, if you’re planning on hunting with your bow, you’ll want one that’s easy to carry and maneuver in the woods.

Next, think about the draw weight of the bow. The draw weight is the force required to pull back the string and launch an arrow. If you’re a beginner, you’ll want to start with a lower draw weight to get used to shooting with a bow. As you become more experienced, you can move up to a higher draw weight if you want more power behind your shots.

Finally, consider your budget when choosing a bow. There are plenty of great options available at all different price points. Once you’ve considered all these factors, you should have no trouble finding the perfect finger-shooting bow for your needs!

Final Words

So, can you shoot a compound bow with your fingers? Technically, yes. But should you? Probably not. Unless you have a specific reason for doing so, it’s generally safer and more effective to use a release when shooting a compound bow. Thanks for reading, and I hope this article helped clear things up!

FAQ

Should I Use Finger Tabs When I Shoot My Compound Bow?

Finger tabs have been largely replaced by shooting gloves, but some archers prefer a tab. They protect your fingers from the bowstring’s wear and tear and provide a consistent surface for the arrow to slip onto as you release it.

A quality finger tab should fit snugly on your fingertips without being too tight and have a smooth surface so the arrow can slide easily off it. If you’re just starting with archery, I recommend using a finger tab until you get comfortable shooting a bow. Then you can try a shooting glove to see if you like it better.

How Many Fingers Do You Need to Draw a Bow?

You can use two or three fingers when drawing a bow, but you will get better accuracy if you use three fingers. With three fingers under the bowstring, you can evenly tension the string with less effort. Two finger tend to put more pressure on one side of the string, which creates more inconsistencies.

Can you shoot a compound bow without a release?

Yes, you can shoot a compound bow without releasing it. Some bows have a “loop-style” release which allows the string to be looped around the middle finger and then pulled back with the index finger, while others have a “hook-style” release which attaches directly to the index finger. If your bow does not have one of these releases, you can still shoot it by using your thumb and first two fingers to hold onto the string, similar to how you would hold a violin bow.

What fingers do you use to shoot a bow?

Nearly every style of modern archery involves using three fingers – the index finger, the middle finger, and the ring finger. The little finger is not used because it can interfere with gripping the bowstring. When drawing back the bowstring, these three fingers are placed above (or behind) the arrow nock, with the thumb gripping the string below (or in front of) these three fingers.

Can you shoot a bow with 2 fingers?

It depends on the type of bow. For example, a traditional bow with feathers and a string would be difficult to shoot with just two fingers. However, modern bows, such as compound bows, can also be shot with two fingers using the thumb. Shooting a bow with two fingers is more advantageous because it gives you more control over the bow and increases accuracy.

Can you pull a compound bow by hand?

Pulling a compound bow by hand is possible, but the process will be much easier by using a teardrop-shaped attachment for the string. This attachment, also called a bowstring, helps evenly distribute the tension on the bowstring when pulled and makes it easier to draw back the bow.

Without using a bowstring, you run the risk of uneven tension on the bowstring, which can cause damage to the weapon. Additionally, pulling a compound bow by hand can be difficult and strenuous, so using a bowstring is highly recommended for anyone attempting this feat.

Meta description:Have you ever tried shooting a compound bow with your fingers? It’s not as hard as it looks! Once you get the hang of it, it can be quite enjoyable. Here are a few tips to help you get started.

Leave a Comment